Which Type of Compressor is Used in Cement Industry?

Generally, the cement plant will be equipped with low-pressure powder system – low-pressure air compressor cement conveying system to solve the problems of noise emission, high oil consumption, cement moisture, inner plate of cement silo, etc. A series of problems such as garbage, falling ash on the warehouse top, environmental pollution and even warehouse explosion have been solved. At the same time, the transportation time was reduced by 50%. The cement conveying system of low-pressure air compressor is equipped with compression system in the concrete station. The compressed air is generated by the low-pressure screw air compressor. Compressed air is stored and buffered through the air tank.

The air supply interface is connected with the pneumatic conveying pipeline. After the powder is transported to the silo, the system will monitor the data of the silo in real time.Once the gas pressure is too high and there is too much powder, the system will start from scratch. Dynamic early warning, locking and closing the air compressor fundamentally solve the problem of over pressure. The conveying system based on low-pressure press can effectively control dust and noise pollution. In many drying plants, raw materials are transported and mixed through compressed air pumps and ventilation equipment to form precise chemical control composites.

In the wet treatment plant, compressed air is used to mix the slurry to maintain the uniformity of the mixture and minerals in the suspension. In order to reduce the fuel consumption in the combustion process, many factories are driven by vacuum pumps.

The filter dries the mud. In order to ensure the free flow and discharge of powdery materials, warehouse ventilation is a common attempt in the whole industry. Of course, cement plants not only use low-pressure air compressors, but also ordinary screw air compressors, variable-frequency air compressors and other air compressors are common configurations in cement plants.